PrintCopy.info service

Canon LBP6230dw

Error Codes List page 1

  • Code: E000-0000
  • Description: Fixing temperature control startup error
    Temperature of the Fixing Assembly did not reach the specified temperature within the specified period of time.
  • Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.
  • Code: E001-0000
  • Description: Abnormal high temperature of Fixing Assembly
    Temperature of the Thermistor continuously exceeded a certain value.
  • Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.
  • Code: E003-0000
  • Description: Abnormal low temperature of Fixing Assembly
    Fixing temperature was lower than the target value at printing/cleaning mode.
  • Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.
  • Code: E004-0000
  • Description: Fixing Heater drive circuit error
    Abnormal frequency was detected in fixing drive circuit within the specified period of time from power-on.
  • Remedy: 1. Check connectors on the fixing film unit. 2. Replace the fixing film unit. 3. Replace the engine controller PCB.
  • Code: E100-0000
  • Description: Laser area failure
    Scanner Motor control error Scanner Motor startup error BDI signal error
  • Remedy: 1. Check connectors on the scanner unit. 2. Replace the scanner unit. 3. Replace the engine controller PCB.
  • Code: E196-0000
  • Description: Error in Engine controller
    A data communication error occurred in the Engine Controller PCB.
  • Remedy: Replace the Engine Controller PCB.
Error Code
Service Mode, Troubleshooting
Parts Catalog
Compatibility
Downloads Files
Home
New Register Forgot Password?
Send message to us