Description: Paper jam in Tray 1 (T1) (It is detects by the registration front sensor)
Causes:
Remedy: • Check if the paper is jammed in the tray. If jammed, remove it. • Adjust the paper guide corresponding to the paper size. • Check if too much paper is loaded in the tray. 1 Harness connection failure of registration front sensor PCB ASSY Check the harness connection of the registration front sensor PCB ASSY in the appropriate tray, and reconnect it. 2 Paper feed roller worn out Replace the paper feed roller. 3 Registration front sensor PCB failure Check the sensor performance following the procedure described in "Maintenance mode 32". If any problem occurs, replace the registration front sensor PCB ASSY. 4 Main PCB failure Replace the main PCB ASSY.
Code: 8D
Description: Paper jam near paper eject tray (When power on, it is detects by the eject sensor.)
Causes:
Remedy: • Remove the jammed paper near the paper eject tray or the back cover. • Close the fuser cover. 1 Paper eject actuator not operating smoothly catching in some position. Re-assemble the paper eject actuator. Ensure the paper eject sensor operates smoothly. 2 Eject sensor PCB ASSY failure Replace the eject sensor PCB ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Code: 9F
Description: Paper empty (It is detects by the registration front sensor)
Causes:
Remedy: • Replenish the paper in the paper tray. 1 Registration front actuator catching in some position Re-assemble the registration front actuator. 2 Registration front sensor PCB harness connection failure Check the harness connection of the registration front sensor PCB and reconnect it. 3 Registration front sensor PCB failure Replace the registration front sensor PCB. 4 Main PCB failure Replace the main PCB ASSY.
Code: A1
Description: Front cover open
Causes:
Remedy: • Close the front cover. 1 Harness connection failure of cover sensor harness ASSY. Check the harness connection of the cover sensor harness ASSY, and reconnect it. 2 Cover sensor harness ASSY failure Replace the cover sensor harness ASSY. 3 Main PCB failure Replace the main PCB ASSY.
Code: A2
Description: Document is too long. (During scanning, 90 cm or longer of a document is detected.)
Causes:
Remedy: • Check if the document is jammed in the ADF. If it is jammed, remove it. 1 Document rear actuator not operating smoothly or catching in some position. Ensure smooth operation and that there is no catching of document rear actuator.
Code: A3
Description: Document rear sensor is not turned on when feeding the document.
Causes:
Remedy: • Check if the document is jammed in the ADF. If it is jammed, remove it. 1 Document rear actuator not operating smoothly or catching in some position. Ensure smooth operation and that there is no catching of document rear actuator. 2 Document rear sensor failure. Replace the document rear sensor. 3 ADF motor failure Replace the ADF motor.